This is a complete motocross graphics kit produced to order for the selected 1998-2001 Ktm 50SX configuration.
The kit includes only the graphic components shown in the product images. Coverage varies by bike model and plastic layout.
Plastics are not included.
All graphics are precision-cut vinyl pieces sized for standard OEM plastic geometry for the listed year and model. Listing images define final coverage and included components.
This kit includes the graphic components shown in the product images for the selected model
and configuration. Coverage varies by bike model and plastic layout. Only the pieces
displayed in the listing images are included.
Number plates and numbering
Default
Ships exactly as shown in the product images.
Blank
No name and no number.
Name + Number
Rider name and number applied as provided.
Name + Number + Sponsors
Rider name, number, and provided sponsor logos applied.
Add-ons
Mini number plates, Instagram tag stickers, and Tiktok tag stickers are included only when selected. They are not
included with the base kit.
Each kit is built using a fixed, repeatable material stack. All kits share the same base
vinyl, adhesive system, and print process.
Material stack: laminate → ink → vinyl → adhesive
Vinyl & Adhesive
White polymeric vinyl with a permanent high-tack adhesive. Identical across
all thickness and finish selections.
Finish
Alters surface appearance only (gloss, matte, or specialty). Does not change vinyl,
adhesive, or print process. Some finishes require thicker laminate builds.
Thickness
Changes laminate mass only. Thicker builds increase rigidity and surface wear
resistance. Thinner builds conform more easily to tight contours.
Manufacturing
Materials manufactured in the USA by Substance Incorporated. Design, printing, lamination, cutting, and
fulfillment performed in-house in Dallas, Texas.
Plastics
Designed for standard OEM plastics for the listed year and model.
Exclusions
Aftermarket plastics, oversized tanks, or custom layouts are not
accounted for unless explicitly stated in the product title.
Verification
If your bike deviates from OEM plastics, fitment should be confirmed prior to ordering.
Method
Produced to order based on the selected model, year, and configuration.
Finalization
Artwork is generated directly from selected options. Once production begins, the
configuration is final.
Skill Level
Assumes basic familiarity with vinyl application techniques.
Preparation
Plastics must be clean and free of dirt, grease, oil, and residue.
Method
Wet and dry installation methods supported. Gentle heat is commonly used to conform
graphics and relieve tension.
Fuel Tanks
Plastic tanks may develop bubbles over time due to fuel vapor permeability.
Perforations help relieve pressure, but bubbling cannot be fully eliminated.
Without Proof
Printed exactly as submitted. Responsibility for spelling, layout, and configuration
rests with the order as placed.
After Proof
Digital proof provided prior to production. Production begins only after approval.
Graphics are consumable surface components. They are not permanent protective coatings.
Cosmetic wear such as scratches, scuffs, and gloss change is expected with riding.
Wear Rate
Varies based on riding style, terrain, frequency of use, and crash exposure. Thicker
laminate reduces visible wear by adding laminate mass. Thinner laminate may show
wear sooner under the same conditions. No thickness option prevents wear entirely.
Use Conditions
Crashes, abrasion, pressure washing, and fuel exposure are considered use
conditions. Visual change resulting from these conditions is not a material defect.
Fuel Tanks
Graphics applied to plastic fuel tanks may develop bubbles over time due to fuel vapor
permeability. Perforations help relieve vapor pressure, but bubbling cannot be fully
prevented. This behavior is inherent to plastic fuel tanks across all manufacturers.
Material Defects
Limited to issues present prior to installation, such as misaligned cutting, print
defects, or delamination before application.
Selections change physical characteristics, not material quality. No option represents a
quality upgrade or downgrade.
Thickness
Alters laminate mass only. Thicker builds increase rigidity and resistance to scratches.
Thinner builds reduce laminate mass and conform more easily to tight
contours. All thickness options use the same vinyl, adhesive, and print process.
Finish
Alters surface appearance only. Gloss, matte, and specialty finishes share the same
underlying vinyl and adhesive. Some finishes require thicker laminate options
due to material constraints.
Customization
Selecting blank, name and number, or name,
number, and sponsors does not imply revisions,
redesigns, or iterative changes unless a proof option is selected.
